Mold heater

We are a professional supplier of silicone rubber heater, PI heating film. Products are widely used in new energy lithium batteries, petrochemicals, medical equipment, high-voltage power grids, daily civil and other industries.

Inquire Now

In order to protect the mold and improve the efficiency of mold use, it is very necessary to keep the working state of the mold within a certain temperature range as much as possible. If the mold is not preheated, on the one hand, due to the low temperature of the mold, it is easy to cause defects such as molding difficulties, mucous membranes, and cracks in the casting. In severe cases, the mold may burst. Therefore, it is very important to preheat the mold before use.

规格 
 Specification
标准型
Standard
连续使用温度
Continuous tempetrature
≤200℃
最高使用温度
Maximum operating tempetrature
250℃
尺寸
Size
最大
Maximum
1200×5000mm
最小
Minimum
20×20mm
厚度
Thickness
0.8-1.5mm(可加厚Can be thickened)
导线长度
wire length
300mm(可加长Can be lengthened)
发热元件
Heating element
镍铬耐热合金发热丝/304不锈钢片
Ni-Cr heat-resistant alloy heating wire/tainless Etching piece
备注
Remarks
表面硅胶
Surface as silica gal

Can be customized according to your actual needs

1 HS Code851680000

2 Sample Lead Time: 3-5 days

3 Bulk Lead Time

                1000pcs——Around 7 days

                5000pcs——Around 15 days

                10000pcs——Around 20 days

                50000 pcs—— Around 25 days

4 MOQ1 pc

5 Shipping MethodsDHL/FEDEX/UPS/ARAMEX/LCL/FCL

6 Payment Terms: TT / Paypal/ L/C /

Send a message

You may also be interested in

Got Free Inquiry Now Please click here for inquiry
If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!